Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

Syncros FL2.0 Stem
$34.99
FL2.0 stems are designed to suit the more price conscious road or mountain biker. The stems are 3D forged from an advanced 6061 alloy to achieve the perfect balance of strength, stiffness, and weight, while the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar.
Syncros RR1.5 Stem
$49.99
RR1.5 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt
Syncros RR2.0 Stem
$34.99
RR2.0 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL6061 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt
Syncros XR2.0 -8° Stem
$34.99
XR2.0 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. - Designed for mountain use - Forged and machined AL6061 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt - Lengths: 50-90mm - Angle: -8°
Race Face Aeffect 35 Stem
$49.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
Promax S-29 Stem
$35.00 - $69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Zipp SL Speed Stem
$265.00
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
Zipp SL Sprint Stem
$265.00
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
Zipp SL Sprint Stem
$246.00
You work hard for those watts—don’t lose a single one through your stem. Zipp’s SL Sprint Stem is built with the beefiest carbon layup imaginable for a strength-to-weight ratio that would humble the strongmen in the pro ranks. At 1.8 grams per newton meter of stiffness, the SL Sprint has graced the bars of countless WorldTour pros. Zipp even uses T25 Torx bolts for their unsurpassed strength, resistance to stripping, and accurate torque setting. Rest assured, it’s ready for you.
Zipp Service Course SL Stem
$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp Service Course SL-OS Stem
$132.00
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch. • Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
Zipp Service Course Stem
$76.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp Service Course Stem
$56.00
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we’ve had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
Whisky Parts Co. No. 7 Mountain Stem
$45.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
Whisky Parts Co. No. 7 Stem
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Vision Sizemore Stem
$69.99
Vision's Sizemore Stem is made of light and durable forged and CNC-machined 6061 T6 aluminum with a 2-bolt front clamp for easy handlebar installation even with clip-on aero bars. This fine stem includes tough M6 bolts and flip/flop graphics that look right whichever way you install the stem.
Velo Orange Cigne Stem
$95.00
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
Velo Orange Tall-Stack Stem
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
TruVativ AKA Stem
$53.00
TruVativ's AKA Stem is 3D forged from 7050 aluminum for durable strength in all conditions. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness. This stem perfectly balances weight and strength for your trail or all mountain bike.
TruVativ Holzfeller Direct Mount Stem
$90.00
Steep descents, nasty rock gardens and high speed: all in a day's work for TruVativ's burly Holzfeller Stem. Made from oversize 3D forged aluminum for serious strength, the Holzfeller thrives on gravity-fueled abuse. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the direct BoXXer mounting delivers pinpoint steering precision and stiffness.
TruVativ Holzfeller Direct Mount Stem
$74.99
Steep descents, nasty rock gardens and high speed: all in a day's work for TruVativ's burly Holzfeller Stem. Made from oversize 3D forged aluminum for serious strength, the Holzfeller takes gravity-fueled abuse like a champ. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the direct BoXXer mounting delivers pinpoint steering precision and stiffness.
TruVativ Holzfeller Stem
$66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
TruVativ Hussefelt Stem
$40.00
TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.
TruVativ Stylo T40 Stem
$96.00 - $108.00
TruVativ's feathery Stylo T40 Stem is 3D forged from 7050 aluminum for that perfect balance of light weight, stiffness and precision steering control on the trail. Six titanium bolts secure this stem to your fork and bars and keep the weight down, too. Plus, with four different lengths and two color options, you're sure to find the perfect stem with which to crown your ride.
Thomson BMX Stem
$114.95
BMX riders need tough components, which is why Thomson developed their BMX Stem. It can handle whatever you can dish out thanks to being constructed from a solid bar of 7000-series aluminum. Plus it's anodized to prevent corrosion and has tough heat-treated bolts. You'll also appreciate the 50mm-wide clamp for a super-secure handlebar and enhanced control, while Thomson's patented undercut around the bars provides even more stability. And, if you run a Gyro, Thomson's got you covered, too, thanks to the built-in spacer that eliminates the need for a separate, loose spacer. And, at only 255 grams, the BMX stem keeps your rig light for the toughest tricks and longest rail rides.
Thomson Elite X4 Mountain Stem
$114.95
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
Syntace Flatforce Stem
$119.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Syncros Creston iC SL Bar/Stem
$549.99
The Syncros Creston iC is the ultimate in terms of integration on the road. Clean and uncluttered our new Syncros combo cockpit allows us to route all the cables completely internally through the bar, headset and into the frame as part of SCOTT’s new ICC routing. - Carbon UD, Superlight Layup - Compact Bend 75mm/125mm Reach/Drop - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/4" for Scott Addict RC MY20 - Weight: 280g
Syncros DH1.5 Stem
$89.99
The Syncros DH1.5 direct-mount stem is made to do anything from blasting berms in the park to sending the gnarliest World Cup Downhill track. The stem is 3D-forged of high-grade 6061 alloy for ultimate strength and the 35.0mm clamp provides a rock-solid hold on your handlebar. - Material: Alloy AL7075 - Weight: 135 grams
Syncros Hixon iC DH 800mm Bar/Stem
$349.99
For 2020, we took our iC (integrated Cockpit) concept and applied it to downhill to produce a light, stiff, and strong one-piece cockpit for the ultimate in downhill speed. At 300g in 800mm width, it's not only one of the lightest bars available, but integrating the stem removes a huge amount of weight from the bike, while the one-piece construction allows us to reinforce key areas to inspire confidence where it is needed. Our carbon engineers worked on the layup to find the perfect balance of stiffness—not too harsh, not too soft, but just right. - Carbon UD - Up Sweep: 5° up - Back Sweep: 8° back - 15mm Rise - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: Direct Mount - Weight: 300g
Page 1 of 3 Next page